Highly efficient perovskite solar cells by tuning electronic structures of thienothiophene-based as hole transport materials

The atomic substitutions were used to study the hole transport materials (HTM) properties of six thiophenothiophene molecules (HTM1-HTM6) to reveal the relationship between their core structures and photoelectric properties. To better investigate the difference between experimentally original and designed molecules, we calculated the hole mobility and some parameters (such as energy levels, stability, and optical properties, etc). The results showed that the molecular orbital levels of the original and designed molecules have well matched with perovskite and Ag electrode to ensure hole transport and inhibit the electron reflux. Among the designed HTMs, HTM5 has the smallest energy gap that results in the red-shifted absorption spectra. Furthermore, there is an obviously increased charge transfer integral V due to the introduction of the Si atom, which greatly improved the hole mobility. Therefore, atom substitution by introducing Si atoms (HTM5) will improve the energy levels and charge transport ability, and molecular design by means of atom substitution can be a potential way to tunable HTM performance in solar cells.     

Ti0.33WO3电子结构和太阳辐射屏蔽性能第一性原理研究

节能减排已成为当今社会发展的主题,对节约能源、提高太阳能的高效综合利用的新型窗用透明隔热材料的理论设计和研究尤其重要.本文采用基于密度泛函理论的计算方法,研究了六方相三氧化钨Ti掺杂前、后的晶格参数、电子能带结构、形成能和光学性质.研究结果表明,Ti掺杂后晶格体积增大,系统能量降为负值,体系具有更好的稳定性;掺杂后电子能带结构发生很大的变化,但材料仍保持n型电导率;随之,其光学性质也发生改变,掺杂前h-WO3无近红外吸收性能,掺杂后的Ti0.33WO3具有很强的近红外吸收性能.在此基础上研究了Ti掺杂h-WO3前、后的太阳辐射屏蔽性能,掺杂前无太阳辐射屏蔽性能;掺杂后的Ti0.33WO3薄膜具有可见光高透明、近红外屏蔽的性能.计算结果为Ti掺杂h-WO3在窗用透明隔热材料方面的研究提供了理论依据.     

A Comparative Study of the Semiconductor Behavior of Organic Thin Films: TCNQ-Doped Cobalt Phthalocyanine and Cobalt Octaethylporphyrin

The structure formed by cobalt phthalocyanine (CoPc) and cobalt octaethylporphyrin (CoOEP) with electron-acceptor tetracyano-π-quinodimethane (TCNQ), was studied by Density Functional Theory (DFT) methods. According to theoretical calculations, both cobalt systems can establish dispersion forces related to TCNQ and also in both cases the link between them is built by means of hydrogen bonds. Based on the results of these DFT calculations, we developed experimental work: the organic semiconductors were doped, and the thermal evaporation technique was used to prepare semiconductor thin films of such compounds. The structure of the films was studied by FTIR and Raman spectroscopy. The optical properties of the CoPc-TCNQ and CoOEP-TCNQ films were investigated by means of UV-Vis measurements. The results obtained were used to estimate the type of transitions and the optical bandgap. The results were compared to the previously calculated theoretical bandgap. The CoOEP-TCNQ film presented the smallest theoretical and experimental bandgap. Finally, the electrical properties of the organic semiconductors were evaluated from a PET (polyethylene terephthalate)/indium tin oxide (ITO)/cobalt macrocycle-TCNQ/silver (Ag) device we prepared. The CoOEP-TCNQ-based device showed an ohmic behavior. The device manufactured from CoPc-TCNQ also showed an ohmic behavior at low voltages, but significantly changed to SCLC (space-charge limited conductivity) at high voltage values.     

Physical,Thermal and Biological Properties of Yellow Dyes with Two Azodiphenylether Groups of Anthracene

Two yellow bis-azo dyes containing anthracene and two azodiphenylether groups (BPA and BTA) were prepared, and an extensive investigation of their physical, thermal and biological properties was carried out. The chemical structure was confirmed by the FTIR spectra, while from the UV–Vis spectra, the quantum efficiency of the laser fluorescence at the 476.5 nm was determined to be 0.33 (BPA) and 0.50 (BTA). The possible transitions between the energy levels of the electrons of the chemical elements were established, identifying the energies and the electronic configurations of the levels of transition. Both crystals are anisotropic, the optical phenomenon of double refraction of polarized light (birefringence) taking place. Images of maximum illumination and extinction were recorded when the crystals of the bis-azo compounds rotated by 90° each, which confirms their birefringence. A morphologic study of the thin films deposited onto glass surfaces was performed, proving the good adhesion of both dyes. By thermal analysis and calorimetry, the melting temperatures were determined (~224–225 °C for both of them), as well as their decomposition pathways and thermal effects (enthalpy variations during undergoing processes); thus, good thermal stability was exhibited. The interaction of the two compounds with collagen in the suede was studied, as well as their antioxidant activity, advocating for good chemical stability and potential to be safely used as coloring agents in the food industry.     

Analysis in protein profile,antioxidant activity and structure-activity relationship based on ultrasound-assisted liquid-state fermentation of soybean meal with Bacillus subtilis

This study investigated effects of ultrasound on the contents of peptide and soluble protein, antioxidant activity, functionalities and structural characteristics of fermented soybean meal (FSBM) with Bacillus subtilis systematically. The results showed that there were significant effects of ultrasound treatments (frequency, treatment time and power density) on the contents of peptide and soluble protein (p < 0.05). Under the optimum ultrasound conditions (power density of 0.08 W/mL, frequency of 33 kHz and treatment time of 1 h) by single factor experiment, the contents of peptide and soluble protein increased by 31.27% and 18.79% compared to those of the control, respectively. Additionally, the in vitro antioxidant activity (•OH scavenging rate, Fe²⁺ chelating capacity and DPPH radical scavenging rate) and functional properties (emulsifying activity and emulsifying stability) of FSBM were found to be noticeably improved by ultrasound (p < 0.05). The fourier transform infrared (FTIR) spectroscopy revealed that ultrasound caused protein molecules to unfold with a decrease content of α-helix and β-turn and an increase in the proportion of β-sheet and random coil. Besides, atomic force microscope (AFM) results indicated that ultrasonication generally increased the surface roughness of protein and the protein sonicated with higher frequency (≥33 kHz) exhibited a greater height compared to lower frequency ultrasonication. Structure-activity relationship analysis illustrated that there was a good linear relationship between •OH scavenging rate and β-sheet/β-turn with Pearson’s correlation coefficient r of −0.86/0.90. Collectively, the selection of ultrasonic parameters is essential for the preparation of functional protein and bioactive peptide by enhancing fermentation of agroindustrial by-products.     

Effects of ultrasound-assisted enzyme hydrolysis on the microstructure and physicochemical properties of okara fibers

This work focuses on the effects of different ultrasound power densities on the microstructural changes and physicochemical properties of okara fibers, which are composed of carbohydrate-based polymers. Okara suspensions were treated with ultrasound at different power densities (0, 1, 2, 3, 4, and 5 W/mL) for 30 min, after which the ultrasound-treated okara were hydrolyzed by trypsin to obtain okara fibers. The ultrasound treatment of the okara fibers induced structural disorganization and changes, evidenced mainly in their morphological characteristics and their relative crystallinity degrees. Increasing the ultrasound power broke the okara fibers into flaky and stacked structures. When the ultrasound power density reached 4 W/mL, the parenchyma became compact and the hourglass structure fractured. The mean particle size of the okara fiber was reduced from 82.24 µm to 53.96 µm, and the homogeneity was enhanced significantly. The relative crystallinity of the okara fibers was reduced from 55.14% to 36.47%. The okara fiber surface charge decreased when the ultrasound power was increased. However, after ultrasound treatment at 4 W/mL (800 W), the okara fiber suspension exhibited the highest viscosity value and a higher swelling capacity, water-holding capacity, and oil-holding capacity. Therefore, the results indicated that the selection of processing conditions for okara fibers is critical and that okara fiber modification using a high ultrasound treatment might improve their use in potential applications.     

Fabrication and luminous properties of phosphor ceramic for application in automotive laser headlight

We report on the optimization of fabrication of a ceramic phosphor plate (CPP) using α-Al₂O₃ as functional materials for an automotive laser headlamp. The prepared CPP shows the high luminous characteristics with increasing α-Al₂O₃ contents because of the light scattering of the hexagonal structure of α-Al₂O₃ materials. We investigated the correlation between α-Al₂O₃ and thickness of CPP. The luminous properties of the CPP are improved and optimized according to the variables of one. We found that the prepared sample is a potential material for future solid-state laser lighting in application as an automotive headlamp.     

Analytical formulas for complex permittivity of periodic composites. Estimation of gain and loss enhancement in active and passive composites

ABSTRACT

The asymptotic homogenization method is applied to complex dielectric periodic composites. An equivalence to coupled dielectric problems with real coefficients is shown. This is similar to a piezoelectric problem: an out-plane mechanical displacement and an in-plane electric potential establishing a correspondence principle. Closed-form formulas for the complex dielectric effective tensor in the case of a square array of circular inclusions embedded in a matrix are given. These formulas are written in terms of a real and symmetric matrix which facilitates the implementation of the computational scheme. We also get similar formulas for multilayered complex dielectric composites. The real closed-form formulas are advantageous for estimating gain and loss enhancement properties of active and passive composites in certain volume fraction intervals. Numerical computations are performed and the results are compared with other approaches showing the usefulness of the obtained formulas. This may be of interest in the context of metamaterials.     

Mn2+、N2-共掺杂Zn2GeO4晶体电子结构和光学性质的研究

采用基于密度泛函理论的平面波超软赝势方法对本征Zn2GeO4，Mn2+掺杂Zn2GeO4，Mn2+/N2-共掺杂Zn2GeO4超晶胞进行了几何结构优化，计算了掺杂前后体系的晶格常数、能带结构、态密度和光学性质。结果表明，Mn离子掺入后，Mn离子3d轨道与O离子2p轨道之间有强烈的轨道杂化效应，掺杂系统不稳定，而Mn/N离子共掺后，Mn离子和N离子之间的吸引作用克服了Mn离子之间的排斥作用，能够明显地提高掺杂浓度和体系的稳定性。光学性质计算结果表明，Mn离子与N离子共掺杂能改善Zn2GeO4电子在低能区的光学跃迁特性，增强电子在可见光区的光学跃迁；吸收谱计算结果显示，Mn离子与N离子掺入后体系对低频电磁波吸收增加。